The article currently titled "AirPort Utility software and firmware downloads" and currently available at tells you where to get Airport Utility. ![]() You can also set up port mapping to direct network traffic to a specific computer on your network. A default host may be useful if you use a computer on your AirPort network to play network games, or want to route all Internet traffic through a single computer. Select “Enable default host,” and enter the IP address of the host.Ī default host is a computer on your network that is exposed to the Internet and receives all inbound traffic. This protocol is implemented in current Apple products, including Mac OS X 10.4 or later, AirPort Extreme and AirPort Express networking products, AirPort Time Capsule, and Bonjour for Windows. Included in the protocol is a method for retrieving the public IP address of a NAT gateway, which allows a client to make this public IP address and port number known to peers that may wish to communicate with it. NAT-PMP allows a computer in a private network (behind a NAT router) to automatically configure the router to allow clients outside the private network to contact this computer. Universal Plug and Play (UPnP) protocol implemented in many NAT routers. In some cases, users have set up their AirPorts to use the same password for the Base. If the AirPort Extreme has been previously set up, you need the Base Station Password for the AirPort to get into the settings using AirPort Utility. NAT Port Mapping Protocol (NAT-PMP) is an Internet Engineering Task Force Internet Draft, an alternative to the more common The 'public' password is only good if the AirPort Extreme has been reset back to factory default settings. Enter the password if necessary.Ĭlick Network and then choose DHCP and NAT from the Router Mode pop-up menu. Select the base station you want to set up, then click Edit. ![]() Open AirPort Utility, located in the Utilities folder in the Applications folder. To set NAT options, your base station or AirPort Time Capsule must be set up to share its Internet connection using DHCP and NAT. If the AirPort Extreme is also in Bridge Mode, it is receiving DHCP and NAT instructions from another router 'upstream' on the network. When you do this, the AirPort Express in Bridge Mode will simply pass through the settings to connected devices. The article currently titled "AirPort Utility 6.x: Set NAT options for your base station or AirPort Time Capsule" and currently available at has: You will need to set up NAT.if possible.on the AirPort Extreme.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |